Looking for a good resource on Rebel Squadron markings and colors. I did some digging, and was only able to find information on X-Wing markings for the Battle of Yavin.
I am trying to get at how the community sees this. I am not as concerned about Canon status as I am about there being a bit of rhyme and reason to the system. I/E: anyone looking at my finished minis should be able to tell squadron and fighter number ( for Rebs).
I am also interested in techniques for applying these tiny markings to our Armada minis. While the minis are quite small, some micro pens should do the trick.
To start things off, I have found several systems for denoting squadron number for X-wings. All are a variant of "tick" or "hash" marks on the trailing edges of the wings.
-
For Rebels, trim color often designates squadron
- At the battle of Yavin, Luke was in Red squadron. His and the other X-Wings were trimmed in Red.
- Gold squadron appeared to be all Y's, which were trimmed in a yellow/gold
- One source states X-Wings were to have been "Blue" squadron originally, but the blue paint and blue screen technique created technical challenges
- "Known" squadron designations: Courtesy of Extropia
-
Less questions for Imperials:
- Rank and file Imp pilots can choose any color for their fighter, so long as it is Imperial Grey
- Named Aces may display a Scarlet Pentagon: see image posted by Extropia below
- Emperor's Guard pilots are Scarlet
-
Soontir Fel and the Bloodstripe:
- Soontir Fel earned the right to display the Correlian Bloodstripe -- the same honor Han Solo displays on his pant leg
- Correllians have been known to kill pretenders who display the stripe
- However, there is Legends material to indicate Bloodstripes in use on other TIE/In's in Fel's 181st Squadron
-
Repaints and Touch up Work
- See Justin Read's response to Painting the Toys thread in Imperial Assault Forum, or his excellent Blog series, sporadic paint flailing
- This is a great resource for paint colors, and Star Wars painting techniques
That leaves several questions:
-
How do
other
Reb fighters indicate fighter number? Is it different for different types of fighters?
- How about Y's, B's, & A's?
-
Do Aces get special markings? If so, what? (See the X-Wing minis Rebel Aces -- red trim on B-wing, Blue on A)
- I seem to recall seeing a "spade" on the nose of an A wing
- Imperials -- less questions here...
- Do Rank and File TIE's have any type of designator, at all?
- What is everyone using for Imp Grey?
Techniques:
-
Rebels:
- Spray a light base coat of white primer, a very light brush coat of white or Ivory:
- All details with Sakura Pigma Micron pens or similar
- http://www.amazon.com/s/?ie=UTF8&keywords=pen+micron&tag=googhydr-20&index=aps&hvadid=31591393477&hvpos=1t1&hvexid=&hvnetw=g&hvrand=11139177232367286220&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_5hrny8brs6_b
- Pen size to be determined once starfighter models are in hand
-
Imperials
- Spray a light base coat of black primer, a very light brush coat of black, & finish with a medium drybrush of "Imperial Grey"
- Aces to get a stripe of Scarlet -- Sakura Pigma Micron Red over a white base
-
Sealer
- Dull Coat or Matte -- possibly a "dot" of gloss over the view-ports (?)
Tons of questions here! Your input and assistance would be much appreciated.
Since this is pretty dense stuff, links to source material work fine for me.
Edited by Commander Kahlain