On 10/24/2019 at 1:43 PM, P-47 Thunderbolt said:

That's a Basilisk, a Besalisk is like Dexter Jettster.

Talk to @Tramp Graphics he's your best bet at getting an appropriate mini

39 minutes ago, RuusMarev said:

buy two figures, cut off the arms on one, glue to the other

That might be what Tramp would do... with metal wire down the center and into the torso.

5 hours ago, RuusMarev said:

buy two figures, cut off the arms on one, glue to the other

And possibly pin for strength

17 hours ago, Daeglan said:

And possibly pin for strength

21 hours ago, EliasWindrider said:

Talk to @Tramp Graphics he's your best bet at getting an appropriate mini

That might be what Tramp would do... with metal wire down the center and into the torso.

You got 'd

On 10/24/2019 at 2:32 PM, ddbrown30 said:

It wasn't mentioned yet and it's definitely the more expensive route, but Hero Forge has some good options for building Star Wars characters. Obviously you're not going to get any of the iconic races or equipment, but you can get pretty close on a lot of things.

I used HeroForge for my Pantoran character (just a human with blue skin, really) and my brother managed to make a pretty dang good Devaronian that way.

We think our Besalisk player is just going to change what race he is playing, since it's been so problematic finding a mini.

Even places like Thingiverse dont seem to want to touch the idea, so we can't just 3D print something.

Oh well.

Thanks for all your help!

In my game we use 3.75 inch action figures. They're big obviously, but scale doesn't matter in this system, and there's a very wide variety available, plus they are quite customizable.

2 hours ago, danicusrex said:

I used HeroForge for my Pantoran character (just a human with blue skin, really) and my brother managed to make a pretty dang good Devaronian that way.

We think our Besalisk player is just going to change what race he is playing, since it's been so problematic finding a mini.

Even places like Thingiverse dont seem to want to touch the idea, so we can't just 3D print something.

Oh well.

Thanks for all your help!

Ijust came across this: https://www.ebay.com/i/264392087650?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=264392087650&targetid=474173451549&device=c&mktype=pla&googleloc=9018832&poi=&campaignid=6469750549&mkgroupid=79220335322&rlsatarget=pla-474173451549&abcId=1141176&merchantid=112174337&gclid=EAIaIQobChMIkNfvypTW5QIVLCCtBh3p0QxvEAQYBSABEgJaSfD_BwE

you could also print a picture of the character and make a paper figure

I just want FFG to produce the minis without the cards/dice for Legion/Imperial Assualt as SW RPG gaming accessories - mainly the generic stormy's, wookies, rebel troopers, speeder bikes etc.

5 hours ago, ExpandingUniverse said:

I just want FFG to produce the minis without the cards/dice for Legion/Imperial Assualt as SW RPG gaming accessories - mainly the generic stormy's, wookies, rebel troopers, speeder bikes etc.

They are unlikely do miniatures that only serve the RPG. Not enough revenue in it.

I use Star Wars Imperial Assault and wizards Star Wars miniatures

The one I've really been having a pain with, is a Selonian engineer. Even without a tail-knife. XP

On 10/17/2019 at 12:02 AM, Varlie said:

I added lightsabers to a Jawa and a Weequay figure

nice! I'd like to see that.

Oops. Just saw it in the picture above... looks good.

Luckily there are several generic jedi miniatures for less than $2 that I didn't mind getting just to swap weapons on the figures I did want. I was especially proud of the weequay one (I'll try to remember to take a picture when I get home), I used the figure below and left the knife portion as the lightsaber pommel (I guess opposite effect of the pommel attachment)

I'm just gonna leave this link here since I recently discovered this site and remembered this thread.

https://www.shapeways.com/shops/mel_miniatures

Lots of stuff here that may be useful for both ground and space combat!

19 hours ago, GameboyAK said:

I'm just gonna leave this link here since I recently discovered this site and remembered this thread.

https://www.shapeways.com/shops/mel_miniatures

Lots of stuff here that may be useful for both ground and space combat!

GM for a previous campaign bought several of Mel’s Armada scale ships, and they’re fantastic. I plan on getting a few in the near future, myself.

On 11/9/2019 at 2:58 PM, ExpandingUniverse said:

I just want FFG to produce the minis without the cards/dice for Legion/Imperial Assualt as SW RPG gaming accessories - mainly the generic stormy's, wookies, rebel troopers, speeder bikes etc.

I managed to pick up a set of 7 SW Legion stormy's for £10 (is that $15??) on Ebay.... unboxed as new... so it's a glue night for me while ep3 plays in the background because ONCE AGAIN THE MISSUS IS OFF TO BAND PRACTICE SO IT'S STAR WARS AT MY GAFF AGAIN!!!!!.... however, I have to remain sober to go pick her up.... dagnabit!

3 hours ago, ExpandingUniverse said:

I managed to pick up a set of 7 SW Legion stormy's for £10 (is that $15??) on Ebay.... unboxed as new... so it's a glue night for me while ep3 plays in the background because ONCE AGAIN THE MISSUS IS OFF TO BAND PRACTICE SO IT'S STAR WARS AT MY GAFF AGAIN!!!!!.... however, I have to remain sober to go pick her up.... dagnabit!

This is why we need to get protocol droids, so we can enjoy our deathsticks in peace! xD

1 hour ago, GameboyAK said:

This is why we need to get protocol droids, so we can enjoy our deathsticks in peace! xD

Oh my!!