As the title says, post your links to token resources that can be used for KeyForge. Sites like Etsy are flooded with new tokens specifically for KeyForge, but, most of the times, shipping costs can be quite high for the low priced tokens. So here an effort to combine these source.
Please post your ideas and links to token resources for KeyForge. Please do not forget to mention if the link/companies/creators are US or EU based.
To start off:
Italian company, EU
: www.3dmasterlab.com. Check out their tokens on Instagram:
https://www.instagram.com/3dmasterlab/
Specially the Armor, Power and Amber tokens look really good!
My only wish is that the Damage Tokens would say -1, -3 and -5...
Hexy.store, Polish Company, EU
The tokens are produced by a subsidiary called Glowna
https://hexy.store/glowna/1568-keyforge-tokens-single-set.html
Clean, easy to read across the table, and thick enough to have a nice feel to them. Most 3D printed are too thin and cheap feeling.
3 minutes ago, Krashwire said:
Clean, easy to read across the table, and thick enough to have a nice feel to them. Most 3D printed are too thin and cheap feeling.
Nice and thick. I just get confused by their color scheme. Blue power tokens...
It makes them readable and clear from the Damage. You could always message them and ask about a different color...
WargearWorkshop, US on Etsy
https://www.etsy.com/shop/WargearWorkshop
If you like bigger tokens... (maybe a bit too big?)
4 minutes ago, Krashwire said:It makes them readable and clear from the Damage. You could always message them and ask about a different color...
Understood. The power card and damage tokens in de starter set are also red. And the power icon on the keyforge card is also red.
Thats why i mentioned that the damage tokens should have a minus (for example -1, -3, -5)
I went to Hobby lobby got 2 grab bags of wood chits, 1 circle 1 square. an hours worth of painting and I got 2 tokens worth of Keyforge awesomeness for 5$
19 minutes ago, 10Ten said:I went to Hobby lobby got 2 grab bags of wood chits, 1 circle 1 square. an hours worth of painting and I got 2 tokens worth of Keyforge awesomeness for 5$
Maybe a photo of the finished tokens and a link to the shop ?
(US) Burger Tokens: https://burgertokens.com/products/keyforge-tokens
(They use American pennies for the middle part, I believe some American quarter-sized key tokens were stated to be coming)
Several printable options on BoardGameGeek (requires you to register an account on the site to download): https://boardgamegeek.com/boardgame/257501/keyforge-call-archons/files
I thought it might be fun to take fate tokens from L5R LCG and use them as aember. Haven't tried it yet but I'll snap a picture if I do.
Team Covenant has some pretty sharp ones , I have a friend that got them.
6 hours ago, CaptainIxidor said:
Thanks! These are mine. I've tried to keep the price down for those that can't quite bring themselves to pay the high prices that acrylic demands. I've had very positive feedback so far. I appreciate being included here.
Etsy has the most? options so far. Not all are my cup of tea and some look too plastic or need a paint job.
https://www.etsy.com/search?q=keyforge
What i did notice is that most token "sets" that you can order from Etsy are limited in the amount of tokens compared to the KeyForge starter set...
The Keyforge Starterkit contains:
- 6 Keys
- 26 Amber
- 22 Damage tokens
- 10 Stun cards
- 10 Power cards
- 2 chains plus 2 trackers
Some 'sets' on Etsy have 10 amber, 5 power, etc etc... And you pay $30 euro for it....
23 hours ago, EdwinFFlight said:Maybe a photo of the finished tokens and a link to the shop ?
I've looked everywhere on Hobby Lobby's webstore. I'll have to go back and get the official name for the chit bag(can't remember)
Would it not be possible that FFG could make a downloadable print and play set of tokens that anyone / new players could access to start off with? Something similar to that of the tokens in the starter set?
Would be good to include this as a PDF in the rules section of the website, so people can print and get started straight away.
17 hours ago, Lockie82 said:Would it not be possible that FFG could make a downloadable print and play set of tokens that anyone / new players could access to start off with? Something similar to that of the tokens in the starter set?
Would be good to include this as a PDF in the rules section of the website, so people can print and get started straight away.
That would be an excellent move because when you buy Keyforge from a LGS then usually they only have displayboxes and not the starter sets. When people are home they could print out the tokens. On the other hand printed tokens are not that great...
Most people i know will use alternative tokens like dice
I know that printed tokens aren't that great, especially compared with some of the 3d printed tokens available from other vendors, but it's a starting point. Pokémon include tokens in their theme decks so it would be good to have something from an official source.
I think these will also be good for beginners to Keyforge, especially if it's their first card game as they may not have dice or other items that could be used as tokens. Having it located next to the rules on the website can give all players a one stop URL to getting started and all the equipment needed.
Just need someone at FFG to action this, I'm sure it's not a difficult job for one of the graphic designers as the starter set have already got versions of the tokens.
5 minutes ago, Lockie82 said:I know that printed tokens aren't that great, especially compared with some of the 3d printed tokens available from other vendors, but it's a starting point. Pokémon include tokens in their theme decks so it would be good to have something from an official source.
I think these will also be good for beginners to Keyforge, especially if it's their first card game as they may not have dice or other items that could be used as tokens. Having it located next to the rules on the website can give all players a one stop URL to getting started and all the equipment needed.
Just need someone at FFG to action this, I'm sure it's not a difficult job for one of the graphic designers as the starter set have already got versions of the tokens.
While FFG doesn't make a P&P resource some fans have made some, which are decent. The most I've seen are on the Keyforge BoardGameGeek page (linked above, requires registration and login) but there's also some stuff on Reddit that I've seen.
My current tokens are currently taken from a couple of fan made resources, which are amazing, whilst I wait for my other tokens to be delivered.
However, I would like to see something that was official that can help new / recreational players through print and play or even distribution at LGS.
Ok. back to the Topic 😁
A great source for Amber Crystals is AliExpress (and probably other chinese webshops).
They generally come in smaller and bigger size
And here some Cubes to go with the Aember, if you are into these. Although technically these are 6D dice, they would work much better as general tokens as reading the sides of the die is almost impossible... 😉
im not sure how big these cubes are as there is nothing to compare it to. The description says 1 side is 1 cm.
And some amber token alternatives, real stone this time, Citrine
