Anyone get a TIE / fo and is it loose like mine? It wobbles worse than any other mini and I'm curious if it's just THIS one or the whole line.

Looks like the 1.0 problem of early stands and late miniatures.

The little peg on my Mining Guild tie was barely glued on and came right off the first time I took it off the stand. Luckily it wasn’t broken, so I glued it on. I’ve noticed a lot of variance over the years in ships with pegs fitting well or being loose, especially on large ships.

Looks like you got a really loose one there. You could remove the little peg or just glue it to the larger peg, but that’s annoying for what you paid for the ship. Probably one to ask for a replacement.

On 12/13/2018 at 9:22 PM, Crabbok said:

Anyone get a TIE / fo and is it loose like mine? It wobbles worse than any other mini and I'm curious if it's just THIS one or the whole line.

Just opened a new Tie/fo and it was just like yours! Good news is it was the pegs not the ship. Did you try it on a different set of pegs? I think there’s something odd with the pegs. I then went back and was able to rotate the original and get it to work. It somehow goes on backwards really loose.

Look at the top of the peg really close and look at an old peg. They’re different. An old peg won’t go in backwards. This one will. Tell me if rotating it worked for you. Hope so!

Update: it’s actually inserting the peg backwards that makes it tight. The normal flat on flat is super loose. It’s definitely the peg though. The ship fits on other pegs normally.

You could magnetize it too.

I didn’t want to at first with my ships that broke off the peg, but once I took the jump it was totally worth it! I bought enough magnets for all my ships, so if they break or when I decide to mag them all I’ll be ready.

Something is odd with the ship too, cause other ships won’t go on its peg in the way I described. Must be some variance with them.

It is ship ID number 13, so no wonder!