New to Epic and had a question about upgrades? Can I put an upgrade on C-ROC or Gozanti that references ranges beyond range 3 (e.g. single turbo lasers)? I don't have any of the two-pilot epic ships, if you can, what would you recommend for a range ruler?

If you have aquired one of those upgrades from the Corvettes you can probably use the same methods to get an official or third party ruler that goes to range 5.

I f you are looking to avoid that and have two standard rulers you can hold them together by hand, or stick them together with tape/glue, such that the range 3 band is overlapping exactly from each. Then you'll have one long ruler with 1-2-3-2-1 on it.

If you don't have two range rulers, just note that each range band is 10cm (equals 3 & 15/16 inches) so you could use a measuring tape or long regular ruler and measure out the distance.

Range 1 = 0-10 cm

Range 2 = 10-20 cm

Range 3 = 20-30 cm

Range 4 = 30-40 cm

Range 5 = 40-50 cm

Hope one of these solutions works for you

Coincidentally, a 5-speed template is the same length as Range 2... so you could measure range by laying the 5-straight down, then measuring from the end of that template, and adding two to whatever you end up with.

2 hours ago, emeraldbeacon said:

Coincidentally, a 5-speed template is the same length as Range 2... so you could measure range by laying the 5-straight down, then measuring from the end of that template, and adding two to whatever you end up with.

Good point, a 5-straight maneuver and a normal range ruler is the same distance as Range 5.

Awesome ... thanks for the help. Single Turbo Lasers here I come.