Can some provide me with the dimensions of the Resistance Bomber model for X-Wing Miniatures? I'm preparing some foam trays and need the length, width and height?
Resistance Bomber Dimensions
Hmmmmmmmm
Length
29.67 meters (97.34ft)
Width
15.3 meters (50.2ft)
Height/depth
21.65 meters (71.03ft)
Divide by 270...Carry the one...Wait a minute?...Oh!...I hope this works...
Length
0.109888889m (10.989cm) (4.3263in)
Width
0.0566666667m (5.667cm) (2.231in)
Height
0.0801851852m (8.01cm) (3.153in)
Now, this may not be correct. I got the dimensions of the actual ship from Wookiepedia and divided by 270.
I hope this works!
-DD
Edited by Darth Dragoadded inches
11 minutes ago, Darth Drago said:Now, this may not be correct. I got the dimensions of the actual ship from Wookiepedia and divided by 270.
I hope this works!
-DD
Thanks! This will give me an estimate until someone with the actual X-Wing model provides the specific dimensions.
@Darth Drago
was pretty close with that guess.
The measurements that I used for my foam were:
L - 4.5 inches
W - 2.5 inches
H - 3.5 inches
When I measured, I rounded all the number up to the next .25 inch, so if you want exact dimensions I can go back and get those. And just so you know, Battlefoam uses 2.5" foam and has the Resistance Bomber on it's side.
11 hours ago, Nspace said:@Darth Drago was pretty close with that guess.
The measurements that I used for my foam were:
L - 4.5 inches
W - 2.5 inches
H - 3.5 inches
When I measured, I rounded all the number up to the next .25 inch, so if you want exact dimensions I can go back and get those. And just so you know, Battlefoam uses 2.5" foam and has the Resistance Bomber on it's side.
Excellent! Thanks!
21 hours ago, Darth Drago said:Hmmmmmmmm
Length
29.67 meters (97.34ft)
Width
15.3 meters (50.2ft)
Height/depth
21.65 meters (71.03ft)Divide by 270...Carry the one...Wait a minute?...Oh!...I hope this works...
![]()
Length
0.109888889m (10.989cm)
Width
0.0566666667m (5.667cm)
Height
0.0801851852m (8.01cm)
Now, this may not be correct. I got the dimensions of the actual ship from Wookiepedia and divided by 270.
I hope this works!
-DD
Pretty much bang on, apparently. Seems like the scale is about right for this, assuming the Wook is accurate - which isn't always a good assumption, of course.
2 minutes ago, thespaceinvader said:Pretty much bang on, apparently. Seems like the scale is about right for this, assuming the Wook is accurate - which isn't always a good assumption, of course.
I was more concerned that it wasn't 1/270 than anything else. So far, the Wook has helped me with X-Wings, TIE Bombers, and some Vulture droids.
-DD