Has anyone posted height and length?

On 12/8/2017 at 0:01 PM, The_Murgen said:

According to Wookieepedia, an AT-ST is 9 m tall, and a AT-AT is 22 1/2 m tall. If the photo above does not have too much depth change due to position, the AT-AT looks over twice the height of the AT-ST, but not three times. Probably pretty close.

3x9 is 27

So an AT-AT is about 2.5 times the height of an ATST, and that picture looks just about right.

Can someone who owns one of these popcorn buckets please post their height? I'd like to compare to my WotC AT-ATs.

Thanks : )

1 hour ago, Nihm said:

Can someone who owns one of these popcorn buckets please post tear height? I'd like to compare to my WotC AT-ATs.

Thanks : )

12" tall from the floor to its tallest point on the back. Each leg is 8" long.

Its 14.5" long from nose cannons to tail.

Its 5" wide at its widest point on the body.

Perfect, thanks! For others interested...

WotC AT-AT is...

13" high(top of base to top of mini)

15.5 " total length(guns to tail)

Legs 8.5" (top to bottom of feet)

4.75" body width

I guess it'll fit pretty well with the Endor Kickstarter, it's only slightly smaller.

Yep. It's one of the best things about the gaming community that I like. With share ideas and cross referencing we can help others make decisions also. Where I am we have a large club and most often make house league campaigns.

I just got my popcorn bucket this week! Once I start painting it I will post photos X-D

Hi all! I am the one who was posted about originally, I finished the paint on it and I have to say it was such a fun project to work on. Here is a more completed shot

Sorry for the lores photo. I’m taking proper photos soon. In the meantime my friend is wiring it up with lights and sound to ensure that this popcorn bucket will be fully armed and operational. I’m posting my progress on instagram @briankesinger

thanks

b

Wrapped my popcorn bucket! It got a couple coats of Light Ghost Grey, followed by Nuln Oil for the weathering. I used Typhus Corrosion for mud and grime on the feet since I'm making an Endor board.

https://imgur.com/a/v8ai6

Holy Hutts! That looks great!

1 minute ago, devin.pike.1989 said:

Holy Hutts! That looks great!

Thanks! I was going crazy weathering this thing until I bought a larger brush. All in all, it was fast and easy. I have another one unpainted that I'm thinking about destroying as some damaged scatter terrain.

You should do a weathering tutorial and post it!

Amazing job! Can't wait to get one

On 12/12/2017 at 2:03 PM, Lumberjack Nick said:

Here’s an updated photo. Looks sooooooooo cool!

Customed Popcorn Bucket

Im getting mine soon. Question: I’m new to painting. It looks like he just brushed Nuln Oil on. No primer or anything else. Is that correct?

It’s definitely primed or painted grey. Maybe both.

The chin guns have a metallic paint.

There is nuln oil everywhere, for sure. I think he’s got something else on there for weathering also. There are colors closer to brown or rust than black, and they look textured.

It looks great though.

Does anyone know if this can be purchased at Disney World (Florida)? A relative is going in 3 weeks and guess what I'd like them to purchase for me?

They are at Disney Hollywood Studios. You can get them at the Popcorn Kiosk/Hut just outside of the Animation Courtyard near The Brown Derby. That is the only place I have seen them being sold.

They go for $25 in the park, you can get one reasonably marked up on eBay from time to time.

My cousin works at Disney corporate and once I found out about these, I contacted her. She is getting me at least 4 of them plus several throw-ins! Can't wait for them to arrive!! I'll post pics once I receive them.

Nephew works at Disneyland and he got me four, but had to wait in line several times as there is a limit of one per purchase.

I've painted two of them (in order, black primer, dark gray, light gray, nuln oil), still want to paint guns metallic

The second one has LED lights, red in cockpit and red flashing lasers - that 'fire' by pressing a button

Of note, they are really for 30mm size (side door size), but work for terrain

To be at scale it would need to be about 18.5" tall.

**** shame I like in the UK, guess I have to stick with the Revell AT-AT kit.

That looks quite acceprable scalewise. Well done.

That will allow some great scenarios, e g. AT-AT automatically advances across the length of the battlefield toward a Rebel base. Rebel mission to halt the AT-AT before it exits, whether by speeder, infantry explosive charge or Luke himself. Imperial infantry/AT-ST have to screen and proect it. Or just as a static scenery piece disembarking stormtroopers, or providing fire support.

AT-AT envy... Have fun!