ive started designing and editing 28mm stl files specifically for legion, things that will help build a 3x6 table e.g. doors windows etc you can download the files for free in the link below. I am adding to it every few days at the moment
enjoy
https://www.thingiverse.com/thing:2507678
3d printable scenery
Spectacular! I've downloaded a few of your designs and printed one of the doors. You, sir, are my hero!
Already saved in my collection
https://www.thingiverse.com/MasterZelgadis/collections/star-wars-legion
Awesome!!!
dont forget to post a pic on thinivers when you have printed one
how much would we need to scale the tantooine xwing gear mate?
1 hour ago, Ralgon said:how much would we need to scale the tantooine xwing gear mate?
I have some of those in my print queue. Iirc I had to scale them up quite a bit as most were only going to be around 20mm tall for the buildings.
31 minutes ago, Patteous said:I have some of those in my print queue. Iirc I had to scale them up quite a bit as most were only going to be around 20mm tall for the buildings.
yeah, xwing is a 1/270 vs legion at around 1/48.
As shotbyscot has the doors correctly scaled now he should have approximates to just scale that gear up by
Edited by Ralgon12 hours ago, Ralgon said:how much would we need to scale the tantooine xwing gear mate?
unfortunately to much. you are better of building some foam board stuff and adding the printable extras. will be a lot cheaper that was as well
I am new to looking at all this printable 3d stuff, looked on Thingiverse, theres a Legion endor Bunker. Did the thing where you can print locally and it was coming up at hundreds of Euros.
50 minutes ago, VAYASAN said:I am new to looking at all this printable 3d stuff, looked on Thingiverse, theres a Legion endor Bunker. Did the thing where you can print locally and it was coming up at hundreds of Euros.
Check your detail settings. The finer the detail the longer it will take and the more expensive it will be.
Or invest in yourself and learn a rewarding new skill in the form of crafting and building your own bunker. It's not as difficult as one might think.
I like 3D printing, but I'd use it for fiddly things like moisture vaporators, computer terminals, door controls, and things like that, personally.
1 hour ago, Force Majeure said:Or invest in yourself and learn a rewarding new skill in the form of crafting and building your own bunker. It's not as difficult as one might think.
I like 3D printing, but I'd use it for fiddly things like moisture vaporators, computer terminals, door controls, and things like that, personally.
If you own the printer and know how it works, you can load a file, hit print and come home to a finished product. If you want a half dozen bunkers, just do that every morning for a week. For someone with limited time, being able to hit print and walk away is a godsend.
You are right, though. Building your own bunker by hand isn't hard. It just takes too much time for me.
13 hours ago, KrisWall said:If you own the printer and know how it works, you can load a file, hit print and come home to a finished product. If you want a half dozen bunkers, just do that every morning for a week. For someone with limited time, being able to hit print and walk away is a godsend.
You are right, though. Building your own bunker by hand isn't hard. It just takes too much time for me.
I do intend to attempt my own bunker, like you though its the time involved. I already spend too much time on my own little hobbies
Has anyone made the half-moon shaped standing computer consoles found in imperial installations?
Edited by That Blasted Samophlange58 minutes ago, That Blasted Samophlange said:Has anyone made the half-moon shaped standing computer consoles found in imperial installations?
I haven't seen one, but that might not be a bad little evening project to design.
On 18-9-2017 at 4:11 PM, VAYASAN said:I am new to looking at all this printable 3d stuff, looked on Thingiverse, theres a Legion endor Bunker. Did the thing where you can print locally and it was coming up at hundreds of Euros.
I designed one, too , to be printed in individual parts. I charge €25 for it. Send me a private message if you're interested.
Edited by TobyW
On 9/19/2017 at 1:31 PM, That Blasted Samophlange said:Has anyone made the half-moon shaped standing computer consoles found in imperial installations?
ill add it too my to design list
Awesome collection!
I have some stuff up at imperialterrain.com , STL's and the such
i have updated the download files and there are a lot more printable files in there
1 hour ago, shotbyscott said:i have updated the download files and there are a lot more printable files in there
Yesssssssssss!
*runs off to d/l teh update*
*see the tree stump*
Squeeeeeee!
3 hours ago, shotbyscott said:i have updated the download files and there are a lot more printable files in there
Super excited about this. I've printed a few of your things.
Has anyone had any luck printing the Shield Generator? When I throw it into my slicer, it shows as damaged. I'm not good enough to know why. I'm using the slicer that came with my Prusa i3 Mk2S.
dont forget to post a photo on thiniverse so i can see you waor. and it helps me get more people down loading my designs
9 hours ago, KrisWall said:Super excited about this. I've printed a few of your things.
Has anyone had any luck printing the Shield Generator? When I throw it into my slicer, it shows as damaged. I'm not good enough to know why. I'm using the slicer that came with my Prusa i3 Mk2S.
Haven't tried printing it yet but cura 2.6.2 had no issues with the slice