Hi I have rendered a 3d printable clone wars y-wing for any one who is interested .... free to download and print your self (scale 1:270)
3d printable clone wars y-wing
Lovely - thank you - printing one now, will post a picture 
45 minutes ago, DangerShine Designs said:Lovely - thank you - printing one now, will post a picture
Finally back home tomorrow, so hopefully I'll be able to give it a try, too...
(...along with a G9 Rigger, YT-1930, Scyk, Star Galleon frigate, Resistance transport & Ycaqt droid ship - too much time away spent searching for STL files 
)
i havent printed it yet and had problem slicing it
2 hours ago, DangerShine Designs said:Lovely - thank you - printing one now, will post a picture
can you drop box me the g code i have problem i cura
1 hour ago, ianmiddy said:Finally back home tomorrow, so hopefully I'll be able to give it a try, too...
(...along with a G9 Rigger, YT-1930, Scyk, Star Galleon frigate, Resistance transport & Ycaqt droid ship - too much time away spent searching for STL files
i have hundreds of stl files in my thinivers collection
http://www.thingiverse.com/shotbyscott/collections/x-wing
23 hours ago, shotbyscott said:i have hundreds of stl files in my thinivers collection
http://www.thingiverse.com/shotbyscott/collections/x-wing
I printed but it didn't come out well at all - I suspect I need to re-level my bed and tinker with some settings, will post a shot of a good model, assuming I get there.
Have been having a blast since upgrading to the Monoprice Mini. Such an upgrade in terms of quality of print and use. Just need to find some time to paint them...
16 minutes ago, DangerShine Designs said:Have been having a blast since upgrading to the Monoprice Mini. Such an upgrade in terms of quality of print and use. Just need to find some time to paint them...
I've got that problem, too - big painting backlog...
...I recognise the front two [of course], but what are the back two - the engine arrangements and body shapes look familiar, but can't think what ? 
49 minutes ago, ianmiddy said:I've got that problem, too - big painting backlog...
...I recognise the front two [of course], but what are the back two - the engine arrangements and body shapes look familiar, but can't think what ?
Found on Thingiverse, but they were the Old Republic Smuggler's ship and Old Republic Jedi ship. At this point I will print pretty much anything Star Wars flavored to get more practice with the settings
Meh - just realized I was contributing to someone else's thread, I thought I was updating mine in the Painting section.
Sorry to the OP for co-opting your post.
3 minutes ago, DangerShine Designs said:
That's great, thanks for the links...knew I had seen the first, think Dinobaldi on here has printed it...but not seen the second one before...there goes more filament!
2 minutes ago, ianmiddy said:That's great, thanks for the links...knew I had seen the first, think Dinobaldi on here has printed it...but not seen the second one before...there goes more filament!
I'm becoming a filament addict 
Just now, DangerShine Designs said:I'm becoming a filament addict
Another form of "Plastic Crack"!
Finally home, had a try at printing the "fixed" version, but it's almost like there are a few points on the model halves that are fractionally lower than the rest, and mine printed a support pattern rather than a flat base...unfortunately, my slicer won't let me set a z-height below zero, so will have to play around with other settings to see if I can get a more usable result 
...also just tried the original version and that doesn't seem to exhibit the problem, but the cockpit looks as though it has issues - is that what the fix was for ?
Oh well, my printer isn't that great at the smaller ships anyway, so was really just an experiment...but would be nice to have an alternate Y-Wing for a "well-maintained" privateer fleet
On 3/3/2017 at 11:30 PM, ianmiddy said:Finally home, had a try at printing the "fixed" version, but it's almost like there are a few points on the model halves that are fractionally lower than the rest, and mine printed a support pattern rather than a flat base...unfortunately, my slicer won't let me set a z-height below zero, so will have to play around with other settings to see if I can get a more usable result
...also just tried the original version and that doesn't seem to exhibit the problem, but the cockpit looks as though it has issues - is that what the fix was for ?
Oh well, my printer isn't that great at the smaller ships anyway, so was really just an experiment...but would be nice to have an alternate Y-Wing for a "well-maintained" privateer fleet
Try the latest version, print it standing upright