Z-95 Revamp

By Gosric, in X-Wing Painting and Modification

MEH... YAH!!! I NEED THREE...LOL!!! (See how nice the guns should be?)

Rihkxyrk 1/270 3d printedImage result for black sun heavy fighter

I will try t get the black sun ships done. But i hve a lot of other ships in the pipeline that have to come first. I will upgrade the E wing though no problem. Glad i finally finished this. The stl conversion a taking forever (i know *L* Any excuse to post the Ravenheart variantts)

css01ravenheartmv_zpsyhzspqql.jpg

Bugger. Well Joe. If you remember some time ago i had a hard drive crash. one of the many ships i lost was that E Wing-H. I can reconstruct a ship with the same gins since i did them seperately but the hull and wings etc are gone. I can make somehting along these lines with my newer wings . but the original is gone Untitled-1_zpsiyrgvixe.jpg

2 hours ago, Gosric said:

Bugger. Well Joe. If you remember some time ago i had a hard drive crash. one of the many ships i lost was that E Wing-H. I can reconstruct a ship with the same gins since i did them seperately but the hull and wings etc are gone. I can make somehting along these lines with my newer wings . but the original is gone Untitled-1_zpsiyrgvixe.jpg

MAKE DAT GREEN ONE...LOL. I like the older one fine just add the turret and guns on a separate sprue... why can't cha just make the green one. I do not like this new one with the engines in the wings.

Basically because i dont like to make other peoples designs unless that person has given his or her blessing to do so. I suppose that sounds hypocritical considering a lot of what i make already exists. But i do tend to stick to the more obscure ships, preferably ones that have only appeared in comics and books where either each time they are drawn they look different or in the case of books where there is leeway in design (im talking to you Brian Daley) There are a lot of different takes on the E Wing so i dont have an isue with making it unless it is someone elses take on the ship. I just have never liked the engines just slung under the wing. It seems fragile for a ship that is supposed to be more heavily armoured and the spindly thin engines dont seem right to me for a ship that is faster than the X Wing

Also there are several versions of that particular E Wing available on Shapeways already. So the market is covered and it would seem rude to introduce another.

However a friend and i tend to bounce our ship designs back and forth for input. Though he doesnt tend to do SW as much. Im waiting to hear back in case he has a copy of the E-Wing/H on his computer.In which case i can fix the original. Although if your biggest problem with it is the inset engines that is an easy fix i can simply lower them and attach them in the standard way

ewm.jpg.0c803c957e9c8cb4f5207f5b6f6225a9.jpg

Edited by Gosric
6 hours ago, Gosric said:

Basically because i dont like to make other peoples designs unless that person has given his or her blessing to do so. I suppose that sounds hypocritical considering a lot of what i make already exists. But i do tend to stick to the more obscure ships, preferably ones that have only appeared in comics and books where either each time they are drawn they look different or in the case of books where there is leeway in design (im talking to you Brian Daley) There are a lot of different takes on the E Wing so i dont have an isue with making it unless it is someone elses take on the ship. I just have never liked the engines just slung under the wing. It seems fragile for a ship that is supposed to be more heavily armoured and the spindly thin engines dont seem right to me for a ship that is faster than the X Wing

Also there are several versions of that particular E Wing available on Shapeways already. So the market is covered and it would seem rude to introduce another.

However a friend and i tend to bounce our ship designs back and forth for input. Though he doesnt tend to do SW as much. Im waiting to hear back in case he has a copy of the E-Wing/H on his computer.In which case i can fix the original. Although if your biggest problem with it is the inset engines that is an easy fix i can simply lower them and attach them in the standard way

ewm.jpg.0c803c957e9c8cb4f5207f5b6f6225a9.jpg

Yah that looks good!

Related image

I know. i like that one. but it isnt mine to make

50 minutes ago, Gosric said:

I know. i like that one. but it isnt mine to make

After trying to get you to be evil... minutes later I saw this on Facebook...lol.

:lol:

Say Goss is this going up too?

yscorpion_zpsd046f68d.jpg~original

i thought it already was. If not then ir can be

53 minutes ago, Gosric said:

i thought it already was. If not then ir can be

I looked at your entire store for it... no sing. I need it!

:lol:

Ok. Ill upload it

Ok. It is up along with the complete engines slung under the wing E-wing with both an ion turret and heavy cannon included

1 hour ago, Gosric said:

Ok. It is up along with the complete engines slung under the wing E-wing with both an ion turret and heavy cannon included

All I need now for this order is my Torps and Turrets... so I can setup my wonderful HUTT Kill Gators!

:lol:

GO.jpg

Dat...

:D

SWCD%2BFEB%2B2016%2BHHKFGUP.jpg

cool. much appreciated ill get the turrets set up. was having a few problems making them printable it was just the sprues were acting odd for some reason

After The little accessories set and them BLACK SUN babies we need to make CARDASSIAN DEFENCE PLATFORMS BABY... for the next big $100 bucks'ish order!!!

CDP%2BGOSS%2B2.jpg

CDP%2BGOSS.jpg

DAT GLORY!!!

mf_emoticon_schoolyou_jedi.gif

Sadly that is something i can't make. Paramount seems to take a decided interest in me. Every time i upload something it gets removed even though i dont make any 'official; ships. and i have had some rather snippy letters. if i start making officilal one especially if they are from the 'newer' series i hesitate to think of the result

2 minutes ago, Gosric said:

Sadly that is something i can't make. Paramount seems to take a decided interest in me. Every time i upload something it gets removed even though i dont make any 'official; ships. and i have had some rather snippy letters. if i start making officilal one especially if they are from the 'newer' series i hesitate to think of the result

Gaddammit... yeah that company I mention in the images was closed down by BIG P... and he had all kinds of coolness on his shop. Now granted he was doing wrong with the product range... Yow!!!

:o

Sad but true. the only things i have from that particular milieu are pne or two old school designs that are my 'interpretations' which have escaped removal.

1 hour ago, Gosric said:

Sad but true. the only things i have from that particular milieu are pne or two old school designs that are my 'interpretations' which have escaped removal.

Yah I did notice that... you used to have all kinds of crazy TREK in your shop.

:mellow:

They go after newer trek like DS9 and TNG and of course the JJ atrocities with coniderably more vigour tha they do with older. So i can usually keep some of my pre mve era Roms and ISS ships up for a bit. But nothing recognizable or later era. I just uploaded a pack of weapons. check it out. might not be the right combo. was a bit out of it when i finished them up late last night

5 hours ago, Gosric said:

They go after newer trek like DS9 and TNG and of course the JJ atrocities with coniderably more vigour tha they do with older. So i can usually keep some of my pre mve era Roms and ISS ships up for a bit. But nothing recognizable or later era. I just uploaded a pack of weapons. check it out. might not be the right combo. was a bit out of it when i finished them up late last night

They look good man. You are supposed to have cannon turrets in one set and torps and missiles in another set... but this is a good starter set to get a few of everything in one purchase. Are you forgetting that I need a ten pack of the torps. I am sure a lot of people are going to want to equip squadrons with the racks of torps... like I am doing. Y-Wings want a set of these... badley for example. It would be glorious to see some other racks of nude ordinances.

Homing Missiles and Ion Missiles are nude, while your missile launcher boxes cover the Concussion Missiles and Cluster Missiles. Your Torps set works for the Ion Missiles with an appropriate paint job. Cluster Missiles are also set on racks so it would be great to have them as a nude set too. They are about half the size of the Homing & Ion sets.

WANT & NEED: Image result for x-wing adv homing Image result for x-wing adv homing You Already Made Them: Image result for missiles in x-wing Image result for x-wing adv homing Image result for ion missiles

Image result for homing missiles in x-wing Get DAT NUDE Missel & Torp pack done baby... and you will make us all happy.

7 hours ago, Gosric said:

They go after newer trek like DS9 and TNG and of course the JJ atrocities with coniderably more vigour tha they do with older. So i can usually keep some of my pre mve era Roms and ISS ships up for a bit. But nothing recognizable or later era. I just uploaded a pack of weapons. check it out. might not be the right combo. was a bit out of it when i finished them up late last night

After looking closely at the whole set again... yah this is a great little starter kit... good job Sir Goss!

:D

GOSSWP SET1 P.jpg