Looking to do some simple color scheme mods for a few ships.

I have no clue where to start on this.

I do know for now I don't want to air brush, trying to keep my cost down a little.

So any starter recommendations?

Hello,

Well if you want to go really simple to start with, here is an easy method for you

https://community.fantasyflightgames.com/topic/190091-weathering-with-pencilsdirt-streaks-grime-rust-blaster-burns/

Its not so much painting as re-touching up the FFG models.

But as regards to repaints.

I always Primer models first with normal Automotive Spray Primer.......

Now here in the UK we have Automotive suppliers like Halfrods that supply a great range of primers.

but be Careful.

They must be Water based like Acrylic and not Cellulose !

Cellulose paint contains Meth based chemicals...like Xylene " Thinners "

this will melt the soft plastic of the FFG models.

Ask your supplier in the UK or US if it is water based paint......most these days usually are.

Model coated in Primer after cleaning with washing up Liquid......this makes a good De-greaser !

I also use spray paint as base colours, but most will use Citidal paint or Vallejo as there Base colours

and then you Have Inking for the Shadowing of the recces on the model and Dry brushing for the Highlights.

All done by Basic Priming, Black Spray for the deep recces, then over sprayed with Humbrol Earth brown.

Masked and block painted some panels in.

Than drybrush highlighting.

Start of small and eventually you will get more confidant.

there are lots of Fantastic Painters on here.

Im sure if you like something you see.

They will give you a tip as to how they Did it.

There are a lot for Very nice People on the paint forum and most are willing to help.

Have fun and all the best,

Barry.

I started out with just cheap, primary colors and one of those multipack brush sets from my local art supply store. I've since upgraded to artist level paints of varying, more specialized pigments and I've been building a more pleasant collection of brushes. But I still just use a good ol' can of Krylon paint/primer mix to prime my models.

But I still just use a good ol' can of Krylon paint/primer mix to prime my models.

Really? Wow

Any reference pics if able

Sure I've just started the base colors on this guy, but you can still see most of the primed area. It took some practice to prime these guys though; it's pretty easy to spray too heavily and lose detail. When I screw it up, I just dump the mini in a jar of Simple Green for a day and slough off the paint with a tooth brush.

Be mindful of the weather! Cold cans mean cold paint that doesn't behave quite as expected.

Either keep your spray cans at room temp or let them sit in a bath of warm (not hot) water for about an hour, more or less, before using.

Use in a well ventilated area, as the atomized paint particles can hang in the air for a surprisingly long time.

And spray from the recommended distance (shown on the can) NOT any closer as you will build up paint too quickly.

Test spray on some old cardboard to make sure the nozzle is clear and won't spurt onto your ship, especially if you've used the can in the past.

Best days to spray are clear and dry. Good luck!