Here is the Executor with the five ISD , Avenger, Conqueror, Devastator, Stalker and Tyrant: It is five ISD's long and about 1 and 1/2 wide. It is painted blue gray. And took about two weeks worth of worth to complete. The hull was a challenge since you had to mark out the edge panels, test fit ,change and finally glue. I had to use epoxy glue to glue the hulls together. And then a lot of clothes pins to hold while the glue set. .It is the same as the first posted on this thread. The pictures posted are the core formation for Death Squadron. I did not paint the ISD or VSD , that would change the whole concept of Death Squadron, so I made placards for each ship with the Death Squadron insignia. The squadrons are the complement carried by each ship.The resin of the ship proved a problem to paint, due to the coating from the manufacturing process.

Here are they five ISD and the VSD Firewind:

Very nice Executor! What did you use for the base and what are the stats for use in game?

Here are some more pictures, this is the base, and the actual ship base stats. I layered the defence as per outer, inner and command hulls. So the damage and fire power comes from the outer hull or is applied to the outer hull working inwards.

The executor has 28 hull points, 8 outer, 10 inner, 10 inner

So to really see the cards go to Kuat Yard works, and I based it off the 3 locations. Cards were done by cynanbloodbane, so credit for the cards and initial bases go to him. I just combined the bases, using EXCEL and printed it out. Seems like the best way to portray the Executor. It is tough but, against squadrons, lacks greatly. I gave it at least speed I though it can move and turn, but requires at least an entire system to do it

Shane