Looking to order some Battlefoam for my empty case.
I'm going to make a custom foam tray that holds some of the ships I don't have.
Need to know if the Punishing One can fit into a 1 inch tray, 2 inch tray, or thicker.
How thick is your toilet seat?
It is about 1 inch tall. I made a foam holder myself out of 1" foam.
I was going to say standard for toilet seats, about 1-1.5" then I remembered that we have a padded one that is almost 3" tall. Then I realized you meant the Punishing One Expansion.
3 inches of pure oak.
3 inches of pure oak.
Never liked wood toilet seats where you can see the wood grain. Used to go to summer camp where they had them and I always swore I was gonna get splinters on my tokus.
Never liked wood toilet seats where you can see the wood grain. Used to go to summer camp where they had them and I always swore I was gonna get splinters on my tokus.3 inches of pure oak.
But plastic is horrible when it's hot.
Never liked wood toilet seats where you can see the wood grain. Used to go to summer camp where they had them and I always swore I was gonna get splinters on my tokus.3 inches of pure oak.
But plastic is horrible when it's hot.
I mean the ones that look like stained wood. If it's wood, but painted, I'm fine. Don't even get me started on padded seats...
Having said all that, I pretty much never use the seat. Not sure how, where, or why, but somehow in my childhood, I learned to use the facilities directly on the porcelain. Heat is never an issue.
Never liked wood toilet seats where you can see the wood grain. Used to go to summer camp where they had them and I always swore I was gonna get splinters on my tokus.3 inches of pure oak.
But plastic is horrible when it's hot.
Canadian here. But plastic is amazing when it's cold.
Looking to order some Battlefoam for my empty case.
I'm going to make a custom foam tray that holds some of the ships I don't have.
Need to know if the Punishing One can fit into a 1 inch tray, 2 inch tray, or thicker.
Including the peg connector it wouldn't quite fit into one inch for me. But you can fit two into one recess in two inch because of the assymmetry.
Especially if someone snaps the peg connector off one by dropping a ghost on it 
if its slightly too tall you can cut that backing foam so the peg base falls into the hole to gain about an extra 1/4 inch...
3 inches of pure oak.
Fat arse 
Cheers
Baaa
Have you considered buying the pluck foam instead of going the custom route? It allows you to cut your spaces for what you need, while still being able to add whatever spaces you need for wave 9 and beyond. I'd recommend getting a good set of scissors to cut out the fabric squares without damaging the surrounding ones.
This method also saves you almost $10 per tray.
3 inches of pure oak.
Fat arse
Cheers
Baaa
At least here in the Midlands we can afford indoor plumbing and don't go in the fields. 
3 inches of pure oak.
Fat arse
Cheers
Baaa
At least here in the Midlands we can afford indoor plumbing and don't go in the fields.
One should never ignore their natural habitat.
Cheers
Baaa