What are they for, exactly? I don't see how they help to track damage.

You use one for each multi figure deployment group. The figures get numbered 1-3 and then you can stack the wound markers next to the figure's number on the tracker, instead of cluttering the board with (and having to constantly move) them.

I have laminated mine- was thinking about using a dry erase marker.

I have laminated mine- was thinking about using a dry erase marker.

I was going to do the same for some tracking sheets that were created on board game geek. They recommend some wet wipe markers. The dry erase may not come off of laminated sheets. You can pick up at walmart these vis a vis pens. http://www.walmart.com/ip/Vis-Vis-Wet-Erase-Marker-SAN16078/14940142?action=product_interest&action_type=title&item_id=14940142&placement_id=irs-2-m2&strategy=PWVAV&visitor_id&category=&client_guid=6417122b-9df2-4ef5-868b-5308298ba072&customer_id_enc&config_id=2&parent_item_id=14940141&parent_anchor_item_id=14940141&guid=f8de9baa-0f92-4043-a505-a28e420474a3&bucket_id=irsbucketdefault&beacon_version=1.0.1&findingMethod=p13n I have not done my sheets yet but I hope to soon.

If you dont want "ruin" the card by laminating them, just buy the FFG sleeves (or whatever equivalent) and dry erase markers will work. Then after a tournament is done, just use a chlorox wet wipe on them.

~D

If you dont want "ruin" the card by laminating them, just buy the FFG sleeves (or whatever equivalent) and dry erase markers will work. Then after a tournament is done, just use a chlorox wet wipe on them.

~D

They are the same size as the hero cards, I haven't found sleeves that size. Do you have a link?

If you dont want "ruin" the card by laminating them, just buy the FFG sleeves (or whatever equivalent) and dry erase markers will work. Then after a tournament is done, just use a chlorox wet wipe on them.

~D

They are the same size as the hero cards, I haven't found sleeves that size. Do you have a link?

Here are the ones that I use for my character sheets. https://www.swanpanasiasleeves.com/collections/standard-sleeves/products/swan-card-sleeves-103x128-100-pack-thin-sleeves-talisman-character-cards

I use these for my Hero Sheets. They are very thick, and have some extra space to stuff sleeved equipment and XP upgrades into:

http://www.amazon.com/Ultra-Pro-Top-Loaders-Pack/dp/B000O9QJP2?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

I picked up a laminator last night. After doing the tracking sheets I one of the vis a vis pens and it wipes off ease with a wet paper towel. I recommend them if you are laminating any sheets you are going to write on.

I had done home made cards that perform the same function and are the size of standard IA cards. They come in 6 colors with 1,2,3 for a deployment, or single deployments to differentiate figures. I also have one with six spots for doors and terminals. If anyone is interested, I can post the files online, just print at 100%. They work like a charm.

I wouldn't mind checking those out.

Yes! Post them Tomkat, that would be awesome!

http://www.keepandshare.com/doc5/13388/deployment-cards-b-w-pdf-9k?da=y

http://www.keepandshare.com/doc5/13389/deployment-cards-r-b-pdf-9k?da=y

http://www.keepandshare.com/doc5/13390/deployment-cards-y-g-pdf-9k?da=y

http://www.keepandshare.com/doc5/13391/door-terminal-pdf-10k?da=y

So some explanation...

The sheets are set up assuming that you will use some colors more often than others. Every group I get I plan to paint with different colored bases. First group I get will be red, second blue, third and fourth black and white, fifth and sixth yellow and green.

For each of the multi-figure deployment cards (1,2,3) I keep the colored card with the deployment card for the respective group. Put the damage and condition tokens in the space on the card corresponding to the figure's number.

For the single figure deployments (officers) I slip the card behind the deployment card with the correct color exposed.

The door/terminal cards are the 1-6 cards, put the colored number token from the game next to each door/terminal to indicate which door/terminal on the map is 1, 2, 3, etc. Then place damage tokens on the card just like with figures.

They should print at the correct size to go in the same sleeves as normal IA cards. Should be pretty easy to change the colors or quantities as needed to suit your minis. Not very fancy, but they do the job well.

http://www.keepandshare.com/doc5/13388/deployment-cards-b-w-pdf-9k?da=y

http://www.keepandshare.com/doc5/13389/deployment-cards-r-b-pdf-9k?da=y

http://www.keepandshare.com/doc5/13390/deployment-cards-y-g-pdf-9k?da=y

http://www.keepandshare.com/doc5/13391/door-terminal-pdf-10k?da=y

So some explanation...

The sheets are set up assuming that you will use some colors more often than others. Every group I get I plan to paint with different colored bases. First group I get will be red, second blue, third and fourth black and white, fifth and sixth yellow and green.

For each of the multi-figure deployment cards (1,2,3) I keep the colored card with the deployment card for the respective group. Put the damage and condition tokens in the space on the card corresponding to the figure's number.

For the single figure deployments (officers) I slip the card behind the deployment card with the correct color exposed.

The door/terminal cards are the 1-6 cards, put the colored number token from the game next to each door/terminal to indicate which door/terminal on the map is 1, 2, 3, etc. Then place damage tokens on the card just like with figures.

They should print at the correct size to go in the same sleeves as normal IA cards. Should be pretty easy to change the colors or quantities as needed to suit your minis. Not very fancy, but they do the job well.

I tried to download these and it says that you need to grant access to them. Can't wait to check them out.

http://www.keepandshare.com/doc5/13388/deployment-cards-b-w-pdf-9k?da=y

http://www.keepandshare.com/doc5/13389/deployment-cards-r-b-pdf-9k?da=y

http://www.keepandshare.com/doc5/13390/deployment-cards-y-g-pdf-9k?da=y

http://www.keepandshare.com/doc5/13391/door-terminal-pdf-10k?da=y

So some explanation...

The sheets are set up assuming that you will use some colors more often than others. Every group I get I plan to paint with different colored bases. First group I get will be red, second blue, third and fourth black and white, fifth and sixth yellow and green.

For each of the multi-figure deployment cards (1,2,3) I keep the colored card with the deployment card for the respective group. Put the damage and condition tokens in the space on the card corresponding to the figure's number.

For the single figure deployments (officers) I slip the card behind the deployment card with the correct color exposed.

The door/terminal cards are the 1-6 cards, put the colored number token from the game next to each door/terminal to indicate which door/terminal on the map is 1, 2, 3, etc. Then place damage tokens on the card just like with figures.

They should print at the correct size to go in the same sleeves as normal IA cards. Should be pretty easy to change the colors or quantities as needed to suit your minis. Not very fancy, but they do the job well.

I tried to download these and it says that you need to grant access to them. Can't wait to check them out.

They all seem to work now for me without having to log in or register with the site. Let me know if they don't work for you. Also, don't get your hopes up too high They are certainly not fancy, but very functional.

I just put the damage on the deployment cards. Figure 1 at the top, figure 2 in the middle (or bottom if only 2 figures) and then figure 3's damage at the bottom of the card. This keeps all the damage tokens off the board and no need for the 'damage tracker' cards taking up more space on the edge of the board where you may have limited space anyway.

With my trooper swarm that would make it 12 cards in width instead of 6. That's a lot of extra space to find in a cramped area already.