Does anyone have their ships handy and can measure their height? I'm trying to make some plans regarding foam storage...

Jacob

From memory, the K-Wing and Kihraxzs are less than 1 inch tall. The Punisher is between 1.5 and 2 inches. The Hiunds tooth I have not attempted to model.

the hounds tooth is ******* huge.

I get that it's big, but I wouldn't mind finding out how big. I do plan to order them, so I will have them in my own hands eventually, but if someone has theirs hand along with a ruler or something to measure...

But thanks for the other ship measurements. That helps me.

Jacob

The Hound's Tooth is just a tiny smidge over 2 inches tall including the peg.

The peg is back a little on the bottom, and the model gets taller at the front. If I let the model just sit "naturally", the front tips down and reduces the overall height. Bottom line, the model as it would sit in a foam sheet is less than 2 inches tall.

Here are a bunch of outlines of sheets I put together in dxf. I think it has everything but the hound's tooth.

https://www.dropbox.com/s/uumu5u6puqv0iu6/1%20inch%20sheet%202.dxf?dl=0

No, I cannot help you put the dxf in any programs, nor do I intend to add dimensions, send pictures, etc, and I do not provide CAD lessons. Some of it is labeled, some of it you'll have to piece together based upon the shapes. I use LibreCAD, and it is free. You'll have to figure it out from there.

GandZ - thanks a bunch. I'm glad you were able to give me that height, as that was the main question I was looking for.

Do you have a more precise height on the punisher? I'm wondering if it will fit on a 1.5" slab of foam. And can you verify the K-Wing is less than 1" tall?

Jacob

GandZ - thanks a bunch. I'm glad you were able to give me that height, as that was the main question I was looking for.

Do you have a more precise height on the punisher? I'm wondering if it will fit on a 1.5" slab of foam. And can you verify the K-Wing is less than 1" tall?

Jacob

As close as I can tell with calipers, the punisher is 1.179 inches tall. My memory was incorrect. The K-wing is more difficult to measure, but is just under 1" (.98" or so to the very tip top of the upper engine)