Now that wave five is finally off the boat, I'm trying to figure out what I'm going to do about storage for the ships.

For anyone that got them early, what are general dimensions (LxWxH) for each ship?

I would like to know the same thing.

No help here, but it made me think of this...

Yeah, I'm doubting the Decimator will even fit in my usual tackle box solution. I might have to settle for a pluckfoam plastic gun case like I did for the huge ships.

Yep. I asked the same thing on an "X-Wing Let's Discuss" vid but didn't get a reply from anyone.

I'm looking forward to the measurements as well.

I usually store big ships in their original plastic holder thingy. That's because the original plastic holder is already tailor-made to fit the contours of the respective big ship.

battle foam all ready has them in their custom foam creator!!!

The foam I cut for them measures at their greatest extent

Decimator. 5.75"x4.134"

Outrider 2.935"x4.296"

The decimator space is pretty good, but as I recall the outrider space I made was kinda a loose fit so you might want to tighten it up a little. Of course, getting the right shape is up to you.

Thanks Forgottenlore, would you say the height of each was around the same as the YT-1300?

Around. Little less actually, with the falcons dish. I used 1.5" foam and that was a perfect height.

And I just double checked and yes, my outrider space is roughly 1/2" too big in both dimensions.

The foam I cut for them measures at their greatest extent

Decimator. 5.75"x4.134"

Outrider 2.935"x4.296"

The decimator space is pretty good, but as I recall the outrider space I made was kinda a loose fit so you might want to tighten it up a little. Of course, getting the right shape is up to you.

Which number is which? I need to know the height.

It should be pretty evident just by looking at each ship which dimension is bigger, length or width.

What I really need is the thickness so I can figure out what thickness of foam to buy.

What I really need is the thickness so I can figure out what thickness of foam to buy.

Around. Little less actually, with the falcons dish. I used 1.5" foam and that was a perfect height.

Oops. I don't know how I missed that. Thanks.